1x4 Amplified GPS Splitter

Overview

ALDCBS1X4 One Input, Four Output Amplified GPS Splitter

The ALDCBS1X4 GPS Splitter (GNSS Splitter) is a one input, four output amplified splitter based on the Wilkinson splitter design. The frequency response covers the entire L-band (all GNSS Frequencies) with excellent gain flatness. In the standard configuration, (J1) passes DC from the connected GPS device through the splitter to the input (antenna port). The other RF outputs (J2, J3 and J4) are DC blocked and loaded with a 200Ω resistor to simulate the antenna current draw to prevent false antenna alarm faults.

Features

• Excellent Gain Flatness
  |J1 – J4| < 1.0dB
• Extremely Flat Group Delay
  Less than 1ns variation
• Amplifier Gain 18dB typical
• Passes all GNSS Frequencies (Entire L-band)
• DC Blocked Outputs Feature 200Ω Loads
  Prevent antenna alarm faults from connected devices
• Phase Matched Outputs
  Phase (J1 – J4) < 1.0o
• Special Configurations Available By Request