1x2 Amplified GPS Splitter

Overview

ALDCBS1X2 One Input, Two Output Amplified GPS Splitter

The ALDCBS1X2 GPS Splitter (GNSS Splitter) is a one input, two output amplified splitter based on the Wilkinson splitter design. The frequency response covers the entire L-band (all GNSS Frequencies) with excellent gain flatness. In the standard configuration, (J1) passes DC from the connected GPS device through the splitter to the input (antenna port). The other RF output (J2) is DC blocked and loaded with a 200Ω resistor to simulate the antenna current draw to prevent false antenna alarm faults.

Features

• Excellent Gain Flatness
  |J1 – J2| < 1.0dB
• Extremely Flat Group Delay
  Less than 1ns variation
• Amplifier Gain 22dB typical
• Passes all GNSS Frequencies (Entire L-band)
• DC Blocked Outputs Feature 200Ω Loads
  Prevent antenna alarm faults from connected devices
• Phase Matched Outputs
  Phase (J1 – J2) < 1.0o
• Special Configurations Available By Request