1x4 Low Noise Filtered Amplified GPS Splitter

Overview

LNFA1X4  One Input, Four Output Low Noise Filtered Amplified GPS Splitter

The LNFA1X4 Low Noise Filtered Amplified GPS Splitter is a one input, four output device with 0dB nominal gain.  The device features a low noise input section to establish an overall system noise figure.  Excellent port-to-port isolation and unity gain are achieved by padded outputs.  The device features excellent frequency selectivity around the L1 band to prevent interference from other high power radio frequency sources, such as cellular transmitter stations.

The LNFA1X4 device will power itself and an external GPS antenna from a 5.0 VDC source connected on any of the RF Outputs. A “hunt-and-pick” circuit is used to select only one DC input for power in the event that more than one source is connected.  Remaining DC inputs are switched to a 200Ω resistor to simulate antenna current draw.

Features

• Low noise
• Amplified Unity Gain 0dB typical 
• L1 GPS Filtered
• Extremely Flat Group Delay
  Less than 1ns variation
• High Isolation Standard
• DC Blocked Outputs Feature 200Ω Loads
• Excellent Gain Flatness