Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-MH 3ME is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.
Innodisk SATADOM-MH 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Advantages
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
Built-in Pin7 VCC
Specifications
Model Name
SATADOM-MH 3ME
Interface
SATA III 6.0 Gb/s
Type
Horizontal
Flash Type
MLC
Capacity
8GB~128GB
Max. Channels
2
Sequential R/W (MB/sec, max.)
300/150
Max. Power Consumption
2W (5V x 400mA)
Thermal Sensor
Wide Temp. only
H/W Write Protect
N
Pin7 Power
Y
ATA Security
Y
S.M.A.R.T.
Y
Dimension (WxLxH/mm)
40.0 x 30 x 9.0
Vibration
20G@7~2000Hz
Shock
1500G@0.5ms
MTBF
>3 million hours
Storage Temperature
-55°C ~ +95°C
Operation Temperature
Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C